Stainless steel through bolt anchor MTH-A4

Through bolt anchor, for high loads in non-cracked concrete. Works by controlled torque expansion. ETE Opt. 7 for structural applications. Shaft and clip made of A4 stainless steel, which gives the anchor high corrosion protection.

ASSESSMENTS AND CERTIFICATES

CODESIZETHICKNESS MAX.FIXTURE (mm)MIN. SUBSTRATE THICKNESSAXIS LETTER (LENGTH)Pcs BoxPcs/Window BoxPcs MasterboxWindow boxes/MasterboxEANInfo. Técnica
MIA406045M6 x 45 Ø61100A2001.2008423533579645
  • tfix - Max. fixture thickness1
  • SW - Installation key10
  • df - Ø Element to fix7
  • Tins - Torque (Nm)7
  • hef - Effective depth25
  • hnom - Min. anchor depth35
  • h1 - Drill hole depth min.40
  • d0 - Ø Drill6
  • hmin - Min. substrate thickness100
  • L - Lenght45
MIA406060M6 x 60 Ø62100B2001.2008423533579652
  • tfix - Max. fixture thickness2
  • SW - Installation key10
  • df - Ø Element to fix7
  • Tins - Torque (Nm)7
  • hef - Effective depth40
  • hnom - Min. anchor depth50
  • h1 - Drill hole depth min.55
  • d0 - Ø Drill6
  • hmin - Min. substrate thickness100
  • L - Lenght60
MIA406080M6 x 80 Ø622100D2001.2008423533579669
  • tfix - Max. fixture thickness22
  • SW - Installation key10
  • df - Ø Element to fix7
  • Tins - Torque (Nm)7
  • hef - Effective depth40
  • hnom - Min. anchor depth50
  • h1 - Drill hole depth min.55
  • d0 - Ø Drill6
  • hmin - Min. substrate thickness100
  • L - Lenght80
MIA408050M8 x 50 Ø84100A1008008423533579676
  • tfix - Max. fixture thickness4
  • SW - Installation key13
  • df - Ø Element to fix9
  • Tins - Torque (Nm)20
  • hef - Effective depth23
  • hnom - Min. anchor depth35
  • h1 - Drill hole depth min.40
  • d0 - Ø Drill8
  • hmin - Min. substrate thickness100
  • L - Lenght50
MIA408075M8 x 75 Ø85100C1006008423533087713
  • tfix - Max. fixture thickness5
  • SW - Installation key13
  • df - Ø Element to fix9
  • Tins - Torque (Nm)20
  • hef - Effective depth48
  • hnom - Min. anchor depth60
  • h1 - Drill hole depth min.65
  • d0 - Ø Drill8
  • hmin - Min. substrate thickness100
  • L - Lenght75
MIA408090M8 x 90 Ø820100E1006008423533579683
  • tfix - Max. fixture thickness20
  • SW - Installation key13
  • df - Ø Element to fix9
  • Tins - Torque (Nm)20
  • hef - Effective depth48
  • hnom - Min. anchor depth60
  • h1 - Drill hole depth min.65
  • d0 - Ø Drill8
  • hmin - Min. substrate thickness100
  • L - Lenght90
MIA408115M8 x 115 Ø845100G1004008423533579690
  • tfix - Max. fixture thickness45
  • SW - Installation key13
  • df - Ø Element to fix9
  • Tins - Torque (Nm)20
  • hef - Effective depth48
  • hnom - Min. anchor depth60
  • h1 - Drill hole depth min.65
  • d0 - Ø Drill8
  • hmin - Min. substrate thickness100
  • L - Lenght115
MIA410070M10 x 70 Ø103100C1004008423533579706
  • tfix - Max. fixture thickness3
  • SW - Installation key17
  • df - Ø Element to fix12
  • Tins - Torque (Nm)35
  • hef - Effective depth42
  • hnom - Min. anchor depth54
  • h1 - Drill hole depth min.60
  • d0 - Ø Drill10
  • hmin - Min. substrate thickness100
  • L - Lenght70
MIA410090M10 x 90 Ø1010110E1004008423533087706
  • tfix - Max. fixture thickness10
  • SW - Installation key17
  • df - Ø Element to fix12
  • Tins - Torque (Nm)35
  • hef - Effective depth55
  • hnom - Min. anchor depth67
  • h1 - Drill hole depth min.75
  • d0 - Ø Drill10
  • hmin - Min. substrate thickness110
  • L - Lenght90
MIA410120M10 x 120 Ø1040110G503008423533579713
  • tfix - Max. fixture thickness40
  • SW - Installation key17
  • df - Ø Element to fix12
  • Tins - Torque (Nm)35
  • hef - Effective depth55
  • hnom - Min. anchor depth67
  • h1 - Drill hole depth min.75
  • d0 - Ø Drill10
  • hmin - Min. substrate thickness110
  • L - Lenght120
MIA410150M10 x 150 Ø1070110I502008423533579720
  • tfix - Max. fixture thickness70
  • SW - Installation key17
  • df - Ø Element to fix12
  • Tins - Torque (Nm)35
  • hef - Effective depth55
  • hnom - Min. anchor depth67
  • h1 - Drill hole depth min.75
  • d0 - Ø Drill10
  • hmin - Min. substrate thickness110
  • L - Lenght150
MIA412075M12 x 75 Ø125100C503008423533579737
  • tfix - Max. fixture thickness5
  • SW - Installation key19
  • df - Ø Element to fix14
  • Tins - Torque (Nm)60
  • hef - Effective depth43
  • hnom - Min. anchor depth55
  • h1 - Drill hole depth min.60
  • d0 - Ø Drill12
  • hmin - Min. substrate thickness100
  • L - Lenght75
MIA412090M12 x 90 Ø1213100D502008423533579744
  • tfix - Max. fixture thickness13
  • SW - Installation key19
  • df - Ø Element to fix14
  • Tins - Torque (Nm)60
  • hef - Effective depth50
  • hnom - Min. anchor depth62
  • h1 - Drill hole depth min.70
  • d0 - Ø Drill12
  • hmin - Min. substrate thickness100
  • L - Lenght90
MIA412110M12 x 110 Ø1218130F502008423533087812
  • tfix - Max. fixture thickness18
  • SW - Installation key19
  • df - Ø Element to fix14
  • Tins - Torque (Nm)60
  • hef - Effective depth65
  • hnom - Min. anchor depth77
  • h1 - Drill hole depth min.85
  • d0 - Ø Drill12
  • hmin - Min. substrate thickness130
  • L - Lenght110
MIA412140M12 x 140 Ø1248130I502008423533579751
  • tfix - Max. fixture thickness48
  • SW - Installation key19
  • df - Ø Element to fix14
  • Tins - Torque (Nm)60
  • hef - Effective depth65
  • hnom - Min. anchor depth77
  • h1 - Drill hole depth min.85
  • d0 - Ø Drill12
  • hmin - Min. substrate thickness130
  • L - Lenght140
MIA416090M16 x 90 Ø164100D251508423533579768
  • tfix - Max. fixture thickness4
  • SW - Installation key24
  • df - Ø Element to fix18
  • Tins - Torque (Nm)120
  • hef - Effective depth49
  • hnom - Min. anchor depth69
  • h1 - Drill hole depth min.75
  • d0 - Ø Drill16
  • hmin - Min. substrate thickness100
  • L - Lenght90
MIA416145M16 x 145 Ø1623168I251008423533579775
  • tfix - Max. fixture thickness23
  • SW - Installation key24
  • df - Ø Element to fix18
  • Tins - Torque (Nm)120
  • hef - Effective depth84
  • hnom - Min. anchor depth104
  • h1 - Drill hole depth min.110
  • d0 - Ø Drill16
  • hmin - Min. substrate thickness168
  • L - Lenght145
MIA416170M16 x 170 Ø1648168K25758423533579782
  • tfix - Max. fixture thickness48
  • SW - Installation key24
  • df - Ø Element to fix18
  • Tins - Torque (Nm)120
  • hef - Effective depth84
  • hnom - Min. anchor depth104
  • h1 - Drill hole depth min.110
  • d0 - Ø Drill16
  • hmin - Min. substrate thickness168
  • L - Lenght170
MIA420120M20 x 120 Ø205145G20408423533579799
  • tfix - Max. fixture thickness5
  • SW - Installation key30
  • df - Ø Element to fix22
  • Tins - Torque (Nm)240
  • hef - Effective depth71
  • hnom - Min. anchor depth93
  • h1 - Drill hole depth min.105
  • d0 - Ø Drill20
  • hmin - Min. substrate thickness145
  • L - Lenght120
MIA420170M20 x 170 Ø2023206K20408423533579805
  • tfix - Max. fixture thickness23
  • SW - Installation key30
  • df - Ø Element to fix22
  • Tins - Torque (Nm)240
  • hef - Effective depth103
  • hnom - Min. anchor depth125
  • h1 - Drill hole depth min.135
  • d0 - Ø Drill20
  • hmin - Min. substrate thickness206
  • L - Lenght170
MIA420220M20 x 220 Ø2073206O20408423533579812
  • tfix - Max. fixture thickness73
  • SW - Installation key30
  • df - Ø Element to fix22
  • Tins - Torque (Nm)240
  • hef - Effective depth103
  • hnom - Min. anchor depth125
  • h1 - Drill hole depth min.135
  • d0 - Ø Drill20
  • hmin - Min. substrate thickness206
  • L - Lenght220
VMIA408075M8 x 75 Ø85100C1088423533753830
  • tfix - Max. fixture thickness5
  • SW - Installation key13
  • df - Ø Element to fix9
  • Tins - Torque (Nm)20
  • hef - Effective depth48
  • hnom - Min. anchor depth60
  • h1 - Drill hole depth min.65
  • d0 - Ø Drill8
  • hmin - Min. substrate thickness100
  • L - Lenght75
VMIA410090M10 x 90 Ø1010110E888423533753847
  • tfix - Max. fixture thickness10
  • SW - Installation key17
  • df - Ø Element to fix12
  • Tins - Torque (Nm)35
  • hef - Effective depth55
  • hnom - Min. anchor depth67
  • h1 - Drill hole depth min.75
  • d0 - Ø Drill10
  • hmin - Min. substrate thickness110
  • L - Lenght90
VMIA412110M12 x 110 Ø1218130F688423533753854
  • tfix - Max. fixture thickness18
  • SW - Installation key19
  • df - Ø Element to fix14
  • Tins - Torque (Nm)60
  • hef - Effective depth65
  • hnom - Min. anchor depth77
  • h1 - Drill hole depth min.85
  • d0 - Ø Drill12
  • hmin - Min. substrate thickness130
  • L - Lenght110
Suitable for climbing equipment in outdoor areas without stress corrosion corrosion cracking problems. SCC (chlorine and sulphur ions). Recommendations are according to UNE EN:959 2021.
  • Fixing of shelves
  • Steel structures
  • Protections
  • Street furniture
  • Machinery
  • Wooden structures
  • Antennae
  • Balcony railings
  • Road railings
  • Wooden railings
  • Beach railings
  • Ceiling lights
  • False ceilings
  • Ceilings

related products

Request more information

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more
MTH-A4

MTH-A4

Through bolt anchor for heavy loads in uncracked concrete

Through bolt anchor, for high loads in non-cracked concrete. Works by controlled torque expansion. ETE Opt. 7 for structural applications. Shaft and clip made of A4 stainless steel, which gives the anchor high corrosion protection.
Mostrar distribuidores con stock disponible
Metal fixings
Chemical fixings
Plastic fixings
Fixings and accessories for thermal insulation systems (ETICS)
Fixings & accesories for plasterboard
Rivets
Rigging hardware and fencing
Accesories for fences and trellis
Fixings & accesories for Drywall
Direct fixing
Screws for decking and façades
Drill, tapping and PVC screws
Wood screws
Nails and bolts
Wood connectors
Standardized nuts and bolts
Plugs, tips and accessories
Heavy metal clamps
Light metal clamps
Fire protection systems
Gutter supports
Plastic clamps
Profiles and supports
Installation systems and fixings for solar panels
Quick beam attachament system
Threaded rod and fixing accesories
Bathroom and air conditioning fixings
DIY

TECHNICAL TRAINING

Our engineering department provides specific and personalised training on the different topics related to fixing systems: metallic or chemical fixings, installation systems, regulations, calculations, etc.

 

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more

site visits

The relationship with our customers does not end with the sale of our products. At INDEX® we understand that it is often necessary to accompany them on site, where our experience is the best ally to ensure fits works perfectly. Our engineers and technicians support the managers of each project in planning and selecting the best solution for effectively saving time and money.

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more

ENGINEERING SERVICES AND CALCULATIONS

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more