High elasticity, multi-purpose liquid hybrid waterproofing membrane based on W-PROTEK technology, designed to protect horizontal and vertical surfaces from the action of water. Available in grey and terracotta
High quality liquid hybrid waterproofing, based on W-PROTEK technology, specially indicated for the waterproofing, repair and maintenance of roofs, terraces, joints and other horizontal and vertical surfaces.
It adheres to the most common building materials such as concrete, tiles, fibre cement, stone, wood, tiles, steel, aluminium…). Applicable even on damp surfaces and surfaces exposed to UV rays, both indoors and outdoors. It can be easily applied by roller, spatula, or brush, without the need for prior priming.
It allows waterproofing, repair and maintenance in various situations, such as joints between roofs, decks, roofs or terraces, solar installations, small waterproofing repairs, joints, cracks or difficult situations, gutters, chimneys, skylights or window boxes, repair of gutters and downpipes, buried concrete structures, foundations and retaining walls, tar or asphalt fabrics, deteriorated areas, and even in the waterproofing of roofs, where the second layer can be used for the installation of ceramic elements or tiles. In addition, it is also recommended for nautical, automotive or caravan applications.
Once applied, it achieves complete drying and optimum waterproofing. It achieves rain resistance within 2 hours of application (at 23°C with 50% relative humidity) and cures approximately 1 mm every 3 hours.
It is walkable when the surface is tiled. In addition, it has a high filling capacity, thanks to its high elasticity (up to 380%).
The handling time of the product is approximately 30 minutes. Usage temperature range from -40°C to +80°C. Application temperature range from +5°C to +40°C. Free of solvents, isocyanates and tars.
Features:
- Can be tiled over
- Applicable on wet surfaces.
- Resistant to rain in 3 hours.
- Immediate application. Very easy to apply. With roller, spatula or brush.
- Indoor and outdoor use
- Resistant even in areas with standing water.
- Can be applied on horizontal and vertical surfaces.
- Good adhesion to numerous surfaces such as concrete, tiles, fibre cement, stone, wood, tiles, steel, aluminium…).
- No need for prior priming.
- Can be walked on tiled surfaces.
- High elasticity (up to 380%) and high filling capacity. Remains flexible from -40°C to +80°C.
- Application temperature from +5°C to +40°C.
- Free of solvents, isocyanates and tars.
- Resistant to a broad spectrum of chemicals.
- Resistant to UV radiation, environmental factors and weathering.
- No sagging.
- Vapour permeable.
- Non-blackening.
Applications:
- Joints between roofs, decks, roofs or terraces.
- Solar installations.
- Small waterproofing repairs.
- Joints, cracks or difficult situations.
- Gutters, chimneys, skylights or window boxes.
- Repair of gutters and downpipes.
- Buried concrete structures, foundations, and retaining walls.
- Tar or asphalt tarpaulins.
- Deteriorated areas.
- In the waterproofing of roofs, the second layer can be used for the installation of ceramic elements or tiles.
- Nautical, automotive and caravan applications.
Tips for a perfect installation:
- The surface where the product is to be applied must be clean and free of dust and grease.
- Before application, shake the can and apply the product using a brush, roller or spatula.
- In sensitive areas, we recommend installing a fibreglass or similar mesh before applying the second layer.
- If the product is wet, remove it with acetone, turpentine or alcohol. If the product is set, remove it mechanically.
